Mold in shoes is more common than you think. A musty odor and sneaky spores can affect your feet and health, especially in enclosed shoes. This quick guide shows simple steps to banish mold fast.
Start by removing insoles and laces. Shake out debris, then air the shoes in a sunny, dry spot or near a window. Use a fan to speed drying if you can.
Clean mold with a mild soap solution. Wipe, then scrub seams with a soft brush. For tough spots, dab with white vinegar and water, then rinse.
Finish with odor control and prevention. Baking soda inside overnight helps absorb moisture. Store shoes in a dry, breathable area and rotate footwear to prevent future mold growth.
Assessing the Mold Problem in Shoes
Mold contamination in shoes is not just an unpleasant sight; it signals a moisture problem that can affect foot health, footwear longevity, and even indoor air quality. Before you dive into cleaning, you must accurately assess the scope of the issue. This means identifying visible growth, odor indicators, and hidden pockets of moisture that nurture spores. If you skip this step, you risk under-treating the problem or selecting methods that damage the material.
Start with a careful inspection of each pair of shoes. Look for fuzzy or powdery patches, especially in seams, toe boxes, insoles, and around eyelets. The colors mold can take include black, green, white, gray, or even pink in rare cases; any unusual coloration warrants closer attention. A musty, damp smell that lingers after airing also points to mold or mildew growth, even if you don’t see obvious patches. Internal components like insoles and fabric linings are common hiding places that harbor mold spores and moisture pockets.
Consider the environment in which the shoes were stored. If they were kept in a damp basement, a closet with poor airflow, or in a sports bag with moisture, the likelihood of mold increases. Note the duration of exposure and whether the shoes recently got wet and were not dried promptly. Documenting these conditions helps you choose the right cleaning approach and whether you should isolate the items during treatment to prevent cross-contamination.
Next, determine the extent of contamination. Light mold on the exterior may be manageable with surface cleaning, while mold inside the lining or in the insole often requires deeper treatment. If mold appears on high-end leather or suede, you may need specialized methods that protect the material’s integrity. If you notice structural damage—fading color, cracking, or delamination—consider whether professional intervention is warranted or if replacement is more cost-effective.
Finally, decide on your cleaning objective. Small patches that don’t penetrate deeply can sometimes be resolved with targeted cleaning and thorough drying. Widespread growth that covers multiple shoe parts or penetrates porous interiors will demand a more comprehensive approach, including disinfection and odor control. Establishing a clear plan reduces trial-and-error, speeds up the process, and minimizes the chance of recontamination during handling.
Signs Mold Is Present
Visible growth is the most obvious indicator, but mold can hide where you can’t immediately see it. Dense patches appear as fuzzy or powdery clusters that cling to fabric, leather, or rubber components. Mold growth tends to cluster in areas that trap moisture, such as the toe box, vamp seams, and the inner lining near the insole. Even if patches are small, they can indicate a broader problem beneath the surface.
Odor is a powerful tell. A musty, damp, or earthy scent that persists after airing suggests mold presence even without strong visual cues. Odor can also indicate fungal colonies within the insole or inner lining, where contamination is not readily visible. Do not ignore a persistent smell; it often means spores are thriving in a hidden moisture pocket.
Moisture indicators are equally important. Condensation lines on the interior fabric, damp insoles, or slow-drying shoes after use point to ongoing moisture issues. If a shoe remains damp for more than 24 to 48 hours, mold growth is more likely to occur or continue. Look for signs of water damage, such as staining or warping, which can accompany mold in footwear.
For a quick check, perform a gentle surface test. Wipe a small area with a mild detergent and see if discoloration lifts or if a new fuzzy patch appears. If you observe color changes, distinct textures, or material softening after cleaning attempts, that’s a sign the mold has taken root beyond a surface layer. Document findings to guide your cleaning plan and determine whether the item should be retired or repaired.
Finally, when in doubt, use a simple field test. Place a piece of white cloth near suspected areas and gently rub. If you notice colored residue transferring to the cloth or a powdery film on the surface, it’s likely mold or a spore-laden layer that requires thorough treatment.
Distinguishing Mold From Odor and Other Issues
Not every musty scent means mold. Odors can stem from bacteria, leather aging, or residual household scents that absorbed into the shoe during storage. To distinguish, examine the source: is the odor tied to fabric linings or the insole, or does it emanate from a broader interior area? Mold tends to leave visible signs or a persistent texture change rather than simply a stale smell.
Visual confirmation is crucial. A fuzzy, powdery, or green-black patch on fabric or leather indicates mold rather than a deodorizing treatment or mineral deposit from water. If you see a slimy film, that could indicate a combination of mold and moisture exposure, which merits stronger cleaning and drying protocols. Remember, some colors may be dye bleeding during cleaning; always test a small, inconspicuous area first to avoid further damage.
Be mindful of material-specific indicators. Leather and suede can develop distinct mold colonies that cling to the grain and open pores. Fabric uppers can trap spores within weave patterns or padding, making them harder to reach with surface cleaners. Rubber and synthetic components may show mold as subtle discoloration rather than obvious patches, requiring careful attention to avoid cracking or stiffening during treatment.
Finally, assess the risk to your health and the home environment. If you or others have respiratory sensitivities, take mold seriously and err on the side of caution. In cases of extensive growth, consider professional remediation or discarding affected items to prevent ongoing exposure.
When to Toss vs Clean
Tiny mold spots on non-porous materials such as hard rubber soles or coated surfaces often respond well to cleaning and will not significantly impact structural integrity. If the mold has penetrated porous interior materials—such as fabric linings or insole padding—and cannot be thoroughly cleaned, replacement may be more practical. Loss of structural integrity, persistent odor after cleaning, or repeated growth are strong indicators you should replace.
If you notice color bleed from delicate materials like high-end leather or suede that cannot be safely cleaned without risk of damage, replacement may be the best option. For athletic shoes with moisture-prone interiors, early intervention is essential to extend life. In some cases, a professional assessment may determine whether restoration is feasible or if safety concerns outweigh the costs.
In all scenarios, consider the impact on other footwear. Mold can transfer through closet racks, storage bins, and laundry spaces. Isolating mold-affected items during treatment is prudent to prevent cross-contamination in your wardrobe. If a pair is extremely compromised, label it as “discard” and move on to safer cleaning options for other shoes.
Finally, keep in mind that prevention reduces the need for future disposal. By addressing moisture sources, improving ventilation, and implementing a routine cleaning schedule, you can dramatically reduce the likelihood of mold returning in any shoe collection.
Safety First: Protecting Yourself and Your Home
Personal Protective Equipment
Cleaning mold requires proper protection to reduce exposure to spores and potential irritants. Start with basic PPE: disposable gloves, a well-fitting mask or respirator, and eye protection. Gloves are essential to prevent skin contact with mold and cleaning agents, while a mask minimizes inhalation of spores during handling and treatment. Eye protection guards against splashes when applying cleaning solutions.
Choose an appropriate respirator or mask. A healthcare-grade mask may not be sufficient for mold spores, especially if you have allergies or asthma. A rated respirator designed to filter mold spores provides better protection. If you do not have a respirator, a tight-fitting mask plus ensuring good ventilation is the next best option.
Protect clothing and skin as well. Wear long sleeves, long pants, and closed-toe shoes to minimize exposed skin, and consider changing into old clothes that you can launder immediately after the cleaning process. Clothing can carry spores to other areas of your home if not properly managed, so promptly bag and wash items that may be contaminated.
After you finish, remove PPE carefully to avoid releasing spores back into the air. Use slow, controlled movements to avoid disturbing settled spores. Dispose of disposable gloves and any disposable cleaning cloths in sealed bags to prevent cross-contamination. Treat reusable tools with clean water and soap afterward to minimize residue.
For households with respiratory sensitivities, consider additional protective steps, such as aHEPA air purifier use during deep cleaning or cleaning mold in a well-ventilated area with doors and windows open. If any family member experiences allergic reactions or respiratory distress during cleaning, pause immediately and consult a medical professional.
Ventilation and Containment
Ventilation is your ally. Open windows and doors to create cross-ventilation that helps exhaust spores and moist air from the workspace. Use a fan pointed away from your face and toward an exhaust area to maintain a steady air exchange. Adequate airflow reduces indoor humidity and speeds up drying after cleaning.
Containment limits the spread of spores. Move mold-affected shoes to a designated area (e.g., a ventilated balcony or outside workspace) away from clean items. Place contaminated footwear in a sealable plastic bag or sealable bin during processing to curb the redistribution of spores to other items in your home.
Keep work zones separate. If you are cleaning multiple items, consider a staging area for clean items and a separate zone for mold-affected footwear. Use disposable towels for the cleaning zone and dedicated cleaning tools that you can disinfect afterward. Avoid using the same brush or cloth on both moldy and clean items without proper sanitization.
Environmental considerations matter. Maintain a humidity level below 50% in the cleaning area if possible, and dry the room after you finish. Excess humidity supports mold regrowth, so it’s essential to maintain a dry, well-ventilated environment to prevent recontamination.
Immediate Steps to Stop Mold Growth
Drying and Dehumidifying
Moisture is the primary fuel for mold growth in shoes. The first step is to remove as much water as possible from the surface and interior. Wipe surfaces with a dry towel, press pads to extract moisture, and replace damp insoles with dry ones if possible. Thorough surface drying reduces active spore proliferation and facilitates subsequent cleaning steps.
Air-drying is often the safest approach, especially for leather and suede. Place shoes in a well-ventilated area away from direct heat sources like radiators or direct sunlight, which can cause cracking or discoloration. For delicate materials, using a shoe tree or stuffing with newspaper helps maintain shape while absorbing moisture.
Use dehumidification to accelerate drying. A dehumidifier is ideal for mold-prone spaces, particularly in basements or closets. If a dehumidifier isn’t available, placing moisture-absorbing products such as silica gel packs near storage areas can help reduce ambient humidity over time.
Control internal moisture. Remove insoles when safe and allow them to dry separately. If insoles are fabric-based, you can wipe them down with a mild cleaning solution and air-dry fully before reinserting. This minimizes the risk of residual dampness that could reignite mold growth.
Monitor progress. Revisit the shoes after several hours to assess dryness. A squeaky-dry feel and no residual dampness are good indicators that the interior moisture is under control. Persistent moisture within the shoe indicates you may need to re-clean and re-dry or apply a deodorizing agent to manage any odor alongside cleaning.
Quick Cleaning Actions
Begin with surface cleaning to interrupt the mold life cycle. Use a mild soap solution or a dedicated shoe cleaner to wipe down exterior surfaces, focusing on seams and inner linings where mold thrives. Rinse with a clean damp cloth to remove any soap residue that could cause staining or damage over time.
Address the insole and liner. Remove the insole if possible and wash it separately according to material type. If the insole is not washable, wipe it thoroughly and treat it with a disinfectant wipe that won’t degrade the material. Allow all components to dry completely before reassembly to avoid trapping moisture inside the shoe.
Kill and inhibit spores. Lightly mist the exterior with a mild disinfectant appropriate for the material (see section on cleaning methods for material-specific guidance). Do not oversaturate fabric or leather; excessive liquid can push contaminants deeper into the material and complicate drying.
Test a small area first. Before applying stronger cleaners or disinfectants, test a hidden area to ensure no discoloration or damage occurs. If the test area remains unaffected, proceed with the broader treatment while watching for adverse reactions on the material.
Reassess after cleaning. If the mold appears to recede and the area dries, inspect for persistent damp spots. If you still detect mold signs after repeated cleaning, you may need to intensify treatment or pursue alternative methods described in subsequent sections.
Cleaning Methods by Material Type
Leather Shoes
Leather requires a soft touch and products that preserve its natural oils. Mold on leather can embed in the grain and seams, so you should aim for a thorough but gentle cleansing that won’t dry out or crack the material. Avoid harsh chemicals that strip oils or cause color loss, and always condition leather after cleaning to maintain suppleness and moisture balance.
Begin with dry brushing to lift surface spores. Use a soft brush to remove loose mold from exterior surfaces without abrading the leather. Follow with a damp microfiber cloth to wipe down areas around seams, where mold commonly hides, then apply a leather-safe cleaner or a 1:1 mixture of water and white vinegar to sanitize and inhibit regrowth.
Use a leather-friendly cleaning solution. A mild soap diluted in water or a dedicated leather cleaner provides effective cleaning without compromising texture. Work in small circular motions, focusing on mold-prone areas, and rinse with a clean damp cloth to remove any soap residue that could darken the leather.
Condition and dry carefully. After cleaning, apply a quality leather conditioner to restore moisture and prevent cracking. Always air-dry away from direct heat to avoid drying out the leather. If the leather remains damp after several hours, continue drying in a well-ventilated area and avoid reconditioning until it’s fully dry to prevent trapping moisture.
Protect against future mold growth. Store leather shoes in a dry, breathable environment and consider using moisture absorbers in the storage area. For leather items frequently exposed to moisture, applying a protective spray designed for leather can help seal the surface and reduce moisture ingress while maintaining breathability.
Fabric and Canvas
Fabric and canvas are more porous, which means mold can penetrate deeper into fibers. This requires a more thorough cleaning approach and often a follow-up with a deodorizing agent to neutralize odors. Use agents compatible with fabrics that won’t cause shrinkage or color fading. If your shoes have fabric liners, you should clean them in a way that does not saturate the material excessively.
Pre-treat stains and patches. For persistent patches, apply a gentle fabric-safe cleaner or a diluted white vinegar solution to the affected areas and let it sit briefly before scrubbing with a soft brush. Rinse lightly to remove residue and avoid soaking the fabric. Address discoloration and texture changes with repeated passes if necessary, ensuring you do not oversaturate.
Thorough cleaning with water-friendly cleaners. Use a mild detergent solution and a soft-bristled brush to loosen embedded mold. Rinse with a damp cloth to remove soap and spores, then squeeze out excess water without wringing the fabric, which can distort shape. Dry thoroughly in a ventilated space, using a fan if needed to expedite drying.
Disinfection and odor control. After cleaning and drying, apply a fabric-safe sanitizer or enzyme-based cleaner to reduce odors and inhibit regrowth. Enzymatic cleaners can be particularly effective on organic materials found in fabric linings. Allow ample drying time and test a hidden area for any color changes before applying to larger areas.
Prevent post-cleaning mold return. Ensure fabric shoes are completely dry before storage and avoid storing them in damp places. Consider using breathable storage boxes and silica gel packs to maintain low humidity around fabric footwear, reducing the likelihood of moisture buildup and recurrent mold.
Deep Clean and Disinfection Techniques
Vinegar-Based Treatments and Baking Soda
White vinegar is a cornerstone of mold control due to its mild acidity, which disrupts mold growth on many surfaces. A diluted vinegar solution can be used to wipe down exterior surfaces and interiors with care to avoid oversaturation. Vinegar provides a non-toxic, cost-effective option for initial disinfection, but it should be followed by thorough drying and, where appropriate, conditioning of leather or fabric to restore texture.
Balancing with baking soda for odor control. Baking soda deodorizes by absorbing odors and can work in tandem with vinegar after the initial disinfection. Sprinkle a small amount of baking soda inside dry shoes or create a paste for targeted areas, then rinse or brush away after a short dwell time. This combination helps neutralize persistent musty odors and can contribute to a fresher overall result.
Application steps and precautions. Apply vinegar to a clean cloth or spray bottle for controlled distribution; never saturate. Allow treated areas to air dry completely before applying other cleaners or reassembling the shoes. After drying, check for any color changes or material softening; if observed, switch to a gentler method or alternative disinfectants compatible with your material.
Handling fabrics and insoles. Fabric linings may respond well to vinegar and baking soda, but be cautious when applying directly to leather or suede. For insoles, remove and treat separately, allowing full drying before reinserting. If odors persist after treatment, repeat the process or try a fabric-safe enzyme cleaner to target odor-causing residues.
When to escalate. If mold coverage is extensive or if odors persist despite vinegar and baking soda, escalate to hydrogen peroxide or enzymatic cleaners, as described in the next subsection. Vinegar-based approaches are excellent for initial cleanup, but they may not suffice for severe contamination or deeply embedded spores.
Hydrogen Peroxide, Bleach, and Enzymatic Cleaners
Hydrogen peroxide is a powerful disinfectant that can kill mold spores on many surfaces without harsh chemical residues. A diluted solution (typically 3% hydrogen peroxide) can be applied to mold-prone areas on non-leather surfaces and allowed to sit briefly before wiping away. It’s important to test a small area first to ensure no discoloration or material damage occurs.
Bleach considerations. Bleach is effective against mold but can damage colors and some materials, especially fabrics with dyes or leather finishes. If you need to use bleach, employ a very diluted solution and apply only to non-porous surfaces. Never mix bleach with ammonia or other cleaners, as this can produce dangerous fumes. Rinse thoroughly afterward and ensure complete drying before reuse.
Enzymatic cleaners for organic residues. Enzymatic cleaners break down mold-related organic compounds in fabrics and insoles, reducing odors and making cleaning more effective. They are particularly useful for athletic shoes and synthetic fabrics. Follow product directions and avoid overuse to prevent residue buildup or material damage.
Integrating multiple methods. You can combine these approaches by using vinegar or baking soda for initial cleaning, hydrogen peroxide for disinfection on non-porous areas, and enzymatic cleaners for odor control after drying. Always ensure each step dries completely before moving to the next to minimize moisture retention and potential recontamination.
Final checks and reconditioning. After disinfection, inspect for color changes or structural changes. Recondition leather with an appropriate conditioner, and rewash or sanitize fabrics if odors persist. Thorough drying remains essential to prevent recurrence, so use air circulation and moisture absorbers in storage areas.
Drying, Deodorizing, and Odor Control
Drying Techniques
Effective drying is the backbone of mold prevention. After cleaning, ensure shoes dry completely before rewearing or storing. Simultaneous dryness of the insole, lining, and outer surfaces minimizes residual moisture that fuels regrowth. Depending on the material, different drying approaches apply to balance speed and integrity.
Natural air-drying with support. Position shoes in a well-ventilated space with a gentle airflow. Use shoe trees, rolled paper, or towels to maintain shape and aid moisture absorption. Mild heat sources should be avoided for leather or suede, which can crack or warp under high temperatures.
Support with mechanical drying aids. For faster results, use a fan or dehumidifier in the room, or a targeted heat source like a hairdryer on a cool setting for spot-drying, being careful not to overheat sensitive materials. Insoles may dry more quickly if removed and dried separately in a warm, airy area.
Check for complete dryness. After several hours, re-check to ensure there’s no dampness at the seams, tongue, or interior padding. Damp pockets may require additional drying time or a secondary cleaning cycle. Ensure the entire shoe is dry to prevent a relapse of mold growth.
Storage considerations post-drying. Once dry, treat the interior with a deodorizing spray designed for the material type and store shoes in a dry, breathable environment. Use moisture absorbers in storage areas to maintain a dry climate that discourages mold from returning.
Deodorizing Inserts and Insoles
Insoles play a major role in odor control. Remove insoles for separate treatment; this allows for more thorough cleaning and faster drying. Insoles can hold mold and residual moisture, so treat them with care and ensure they’re completely dry before reinsertion.
Use odor-control inserts. After cleaning and drying, place moisture-absorbing inserts such as silica gel, activated charcoal, or baking soda packs inside shoes to continue odor control. Replace these inserts regularly to maintain their effectiveness and prevent a new buildup of dampness.
Odor-neutralizing sprays. Fabric-safe odor-neutralizing sprays can help eliminate persistent smells, especially in fabric uppers and liners. Apply lightly and allow to dry before wearing. Check product compatibility with your shoe materials to avoid staining or texture changes.
Regular deodorizing routines. Include odor control in your maintenance schedule, especially for shoes used in humid environments or sport activities. A routine that includes drying, deodorizing, and storage optimization will reduce the risk of mold recurrence and help keep shoes fresh longer.
Special considerations for insoles. If an insole is heavily contaminated or cannot be adequately cleaned, consider replacing it. A fresh insole can dramatically improve hygiene and comfort, reducing the likelihood of mold reestablishment inside a shoe’s interior.
Prevention: Keeping Shoes Mold-Free
Storage Habits
Storage conditions have a profound impact on mold risk. Aim for dry, well-ventilated storage spaces with air movement to discourage moisture buildup. Avoid placing shoes in sealed, damp containers or plastic bags for extended periods, as these trap moisture and invite mold growth. Opt for breathable storage solutions whenever possible.
Rotate footwear to allow full drying. Do not wear the same pair daily after wet exposure; rotating shoes gives each pair ample time to dry completely between uses. This practice minimizes the chance that a single damp shoe pool becomes a mold nursery.
Use moisture-control products. Silica gel packs, activated charcoal, or other moisture absorbers help maintain a dry microclimate inside storage containers or closets. Replace these products routinely to ensure effectiveness and continue suppressing humidity around your footwear.
Maintain organized storage. Keep shoes off the floor, on shelves with airflow, and separated to prevent cross-contamination. For closet storage, use shelves that allow air to circulate and avoid stacking heavy items directly on top of shoes, which can trap moisture and promote mold survival.
Seasonal storage strategies. During seasons when shoes aren’t in use, perform a quick inspection, clean, and dry before placing them into storage. Add a fresh moisture absorber and routinely check storage areas for signs of dampness or condensation to preempt mold problems.
Drying After Use
Drying after use is essential, especially for athletic or outdoor footwear that frequently gets damp. Establish a routine where you dry shoes promptly after use, especially in rainy weather or after workouts, to prevent mold spores from gaining a foothold. Quick action yields better outcomes in the long run.
Remove excess moisture before drying. Use a towel to blot away surface moisture and remove insole to address the interior thoroughly. This step reduces the water load the drying environment must handle and speeds up the process.
Choose the right drying environment. A shaded, ventilated area is preferable to direct heat sources that can damage materials. If you need a faster result, a fan or dehumidifier can help move air and reduce humidity without overheating the shoes.
Inspect after drying. Check for any residual dampness and ensure the interior is completely dry. If you still detect moisture, re-treat with appropriate methods and allow additional drying time before storage or wearing again.
Prevent future dampness. For frequently damp environments, consider moisture-control accessories in your storage area and ensure the shoes have proper airflow to discourage mold-favorable conditions from developing again.
Special Scenarios: Sports Shoes, Winter Shoes, and Wet Environments
Sports Shoes and Cleats
Sports shoes pose unique mold risks due to frequent moisture and moisture-prone interiors. Cleats and training shoes typically have more synthetic content and breathable uppers, but they still trap moisture in the inner lining. Treat these items promptly after use to prevent the growth cycle from taking hold.
Focused interior cleaning. Remove insoles and clean them separately using fabric-safe cleaners. Wipe the interior lining with a mild solution to remove mold and residues, then dry thoroughly. Sports shoes often dry faster when placed in a well-ventilated space with a fan, avoiding sun exposure that could warp the material.
Check for odor buildup. Sports shoes accumulate odors quickly due to body sweat. After cleaning, use odor-control methods such as enzymatic cleaners or baking soda inside the shoes to neutralize smells. This improves comfort and reduces the likelihood of mold regrowth in the future.
Inspect for material wear. Sweat and moisture can degrade foam inserts or interior padding. If you detect excessive wear or crumbling interiors, consider replacing components to maintain performance and hygiene, as mold can hide in compromised areas.
Protect future performance. Apply a protective spray compatible with synthetic uppers, and ensure your storage environment remains dry and ventilated. Routine checks after intense training sessions help maintain mold-free sports footwear.
Winter and Wet-Weather Footwear
Winter footwear commonly encounters prolonged moisture exposure from snow, rain, and slush. The combined effect of humidity and low temperatures creates ideal mold conditions inside irregularly dried shoes. Develop a practical routine that includes prompt drying and targeted disinfection for winter gear.
Addressing salt and mineral residues. Many winter boots accumulate salt and mineral deposits from de-icing agents, which can irritate materials if left untreated. Clean residue with a damp cloth before drying and treat surfaces with a mild cleaner suited to the boot’s material. Rinse as needed to avoid leaving a residue that could attract moisture.
Material-specific considerations. Suede and nubuck winter footwear require special care, as traditional cleaners may darken or damage the nap. Use products designed for suede and nubuck and avoid aggressive abrasion to prevent irreversible changes in texture. Drying should be gentle to preserve the nap and prevent warping from cold-induced moisture fluctuations.
Storage after winter use. After drying, store winter footwear with desiccants to prevent moisture buildup. Regularly inspect stored items over the season-changing period to catch mold early and implement preventative measures before mold takes hold.
Preventive routines for winter gear. Maintain a cleaning schedule for winter shoes, including post-use inspection, targeted cleaning, and a controlled drying strategy. This reduces the risk of mold development and preserves the fit and comfort of your winter footwear.
Conclusion
Mold in shoes is a common, manageable issue when addressed with a clear plan. By assessing the problem, prioritizing safety, selecting material-appropriate cleaning methods, and implementing robust drying and preventive practices, you can extend the life of your footwear and protect your living space. A disciplined routine—identifying signs early, cleaning thoroughly, and storing properly—will keep shoes fresh, dry, and mold-free for seasons to come.
Recommended Products
